Request a bill review
Discovery Energy ยท Industries

Utility bill audits for food and protein processors

Food plants run refrigeration around the clock, raise steam for cooking and sanitation, and often peak in the same summer weeks their utilities charge the most. That combination makes seasonal rates, demand charges and gas service terms the places where processing bills go wrong. We audit electricity and natural gas bills for multi-plant food companies off-site and on contingency.

01 / 07

Why utility costs matter in food processing

The US Energy Information Administration (EIA) measures plant energy use in its Manufacturing Energy Consumption Survey (MECS). The 2022 survey shows how food plants split their energy between gas and power, and what each one does.

1,235 trillion Btu
Energy used as fuel by US food manufacturers in 2022, about 8% of all manufacturing fuel use (15,742 trillion Btu).
704 trillion Btu
Natural gas used by food plants, more than half of their fuel. About 56% of that gas (394 trillion Btu) went to boilers, for steam and hot water.
About 27%
Share of food plants' electricity used for process cooling and refrigeration (73 of 271 trillion Btu).
About 40%
Share of electricity used for refrigeration in animal slaughtering and processing, the meat and poultry segment (31 of 76 trillion Btu).

The operating pattern matters as much as the totals. Meat, poultry and dairy plants hold product cold 24 hours a day, so their electric load never drops far. Production shifts are followed by sanitation shifts, which use hot water, steam and clean-in-place (CIP) systems at night. Bakeries run gas ovens and fryers. Beverage plants run chillers, compressed air and bottling lines. Fruit and vegetable packers can do most of a year's work in a few months.

Several segments also generate their own steam and power. The MECS shows 258 trillion Btu of natural gas used for combined heat and power (CHP) or cogeneration in food plants in 2022. A plant with on-site generation is usually billed on a standby or backup rate, which is one of the more complex schedules a utility has.

02 / 07

How food plants are billed

Tariffs differ by utility and state, but a processing plant's electric and gas bills are usually built from the same parts.

Tariff featureWhat it meansWhy it matters for food plants
Seasonal ratesHigher energy or demand prices during summer months set by the tariff.Refrigeration load peaks in summer, so the dates on which summer pricing starts and ends move real money.
Demand chargesA charge on the highest kilowatt (kW) reading in the billing period, often a 15- or 30-minute average.Compressor start-ups, freezer pull-down after defrost and line start-ups set the peak.
Demand ratchetsA minimum demand charge set by a past peak, often a percentage of the highest reading in the last 11 or 12 months.One hot-day peak can set billing demand through the winter.
Time-of-use (TOU) periodsDifferent prices by hour of day and season.Sanitation and night production can be cheaper on TOU, but only if the account is on that schedule.
Rate class and voltageThe schedule an account is assigned by size, load factor and service voltage.Steady 24-hour refrigeration gives a high load factor, which can favor large-power or primary-voltage schedules.
Power factor chargesA charge or demand adjustment when the plant draws reactive power from motors and compressors.Motor-heavy plants are the ones most often billed for it.
Gas sales vs transportationGas bought from the utility, or delivered by the utility for a third-party supplier.Boiler-heavy plants often buy supply separately, so two bills have to agree.
Firm vs interruptible gasInterruptible service is cheaper but can be curtailed in cold weather.Suits plants with backup fuel, not plants that cannot stop their boilers.

03 / 07

Where food processors overpay

Most of these look like a normal invoice: the math adds up, but the rate, date or reading behind it is wrong.

Summer rates billed outside the tariff's dates

The bill applies summer pricing to service days that fall in the winter season, or keeps it on after the season ends. It shows up only when each billing period's exact dates are compared with the tariff. See seasonal rate errors.

A rate class that predates an expansion

A new freezer, cook line or second shift changes load and load factor, but the account stays on the schedule it opened on. See rate misclassification.

Ratchets and demand readings

Billing demand stays high for months after a one-time peak, or a ratchet is applied that the current tariff no longer includes. See demand charge errors.

Meter multipliers after service upgrades

New compressors or a larger transformer can change the meter's multiplier. If the billing system is not updated, every reading is scaled wrong. See meter multiplier errors.

Plants billed as commercial instead of industrial

A processing account coded as commercial can pay a different schedule and charges it does not owe. See corporate classification errors.

Gas service that no longer fits the boilers

A plant pays firm sales service when it could qualify for transportation service, or the supplier invoice and the utility delivery bill use different volumes.

Estimated reads that were never trued up

Hard-to-reach meters are estimated for months and the correction never arrives. See estimated reads.

Illustrative example

A tariff's summer season starts June 1. A plant's billing period runs May 12 to June 11, and the whole period is billed at summer prices instead of prorating the 20 May days at winter prices. The overcharge is the difference between summer and winter prices on 20 days of refrigeration load, and because it comes from how the season is set up in the billing system, it can repeat every year. This example is illustrative, not a Discovery result.

04 / 07

What we have found at food plants

The clearest food result is a national protein processor in Missouri. Its 800,000-square-foot plant runs refrigeration and processing around the clock. The company's controller had already reviewed the accounts and found nothing conclusive. Our audit compared each billing period with the tariff's seasonal dates and found summer rates billed weeks early, and then found the same error in a second year.

Protein processing plant, Missouri$166,957Recovered after summer rates were billed weeks early in two separate years. Read the case.
Adjacent: diversified agribusiness, 3 states$117,412Refunds across grain, flour and soybean operations, plus about $120,000 a year from a rider opt-out. Read the case.

Across all industries since 2000, recoveries have most often equaled 3% to 15% of annual utility spend, depending on the utilities and the billing history. There is no guaranteed finding, but the larger and more seasonal the load, the more each error costs.

05 / 07

How an audit works for a food company

  1. Send a list of accounts or one recent bill per plant

    Electricity and natural gas accounts for plants, cold storage, offices and wastewater pretreatment buildings. A 15-account pilot is available if you want to start small.

  2. Sign a letter of authorization

    The letter of authorization (LOA) lets us request billing history, meter data and rate details directly from each utility, so your team does not have to pull years of invoices.

  3. We review 36 to 48 months of bills

    Every bill is tested against the tariff in force on those dates: season, rate class, demand, ratchet, multiplier and riders. The work is off-site. There is no hardware, no site visit and no production interruption.

  4. First findings in 30 to 60 days

    Each finding comes with the tariff section and the bills it affects. Nothing is filed and no account is changed without your written approval.

  5. Refunds, usually 60 to 120 days later

    We file the claims and follow them through. The recoverable period is typically 1 to 5 years, set by each state and utility. There is no upfront fee: the fee is a share of refunds and verified savings, usually 15% to 50%, paid only when you receive them.

06 / 07

What to gather before you start

  • A list of plants with utility names and account numbers, or one recent bill per account.
  • Dates of expansions, new refrigeration, boiler or CHP projects and shift changes.
  • Any gas supply contracts and the matching supplier invoices.
  • Plants opened, closed, sold or acquired in the last five years.

After the audit

Each of these can be engaged on its own.

  • Energy procurement: a steady 24-hour refrigeration load is often easier for suppliers to price. Any supplier commission is disclosed up front.
  • Utility bill pay: every bill checked before payment and paid on time. Water, sewer and wastewater surcharge bills can be included in bill pay; they are not part of the audit.
  • Cost allocation: bills coded to the right plant, department or GL account.
  • TaraBase reporting: savings, usage, contracts and Scope 2 data from the bills, for sustainability reports and customer questionnaires.

07 / 07

Questions buyers ask

Fees, results, and how an audit fits beside the broker or energy manager you already have.

Our plant already has an energy manager. Why would an audit find anything?

Energy managers focus on how much energy the plant uses. A bill audit checks whether the utility billed it correctly under its tariff. In the Missouri protein case, an internal review had already found nothing before the audit recovered $166,957.

Will the audit interrupt production or sanitation?

No. The audit works from bills, meter data and tariffs obtained from the utility. There is no site visit and no equipment to install.

Do you audit water and wastewater bills?

No. Our audits cover electricity and natural gas. Water, sewer and wastewater surcharge bills can be included in our bill pay service so they are paid on time and coded correctly.

How far back can a refund go?

We review 36 to 48 months of bills. The period a utility must refund is typically 1 to 5 years, set by each state and utility's rules.

What does it cost?

There is no upfront fee. The fee is usually 15% to 50% of refunds and verified savings, paid only when you receive them. Utilities never pay us. See pricing.

Can we start with one or two plants?

Yes. A 15-account pilot audit is available. It tests the same tariff checks on a smaller set of electric and gas accounts before you commit the rest of the portfolio.

Sources

  1. US EIA, 2022 Manufacturing Energy Consumption Survey, Table 5.2: End uses of fuel consumption, food (NAICS 311) fuel use, natural gas, boiler fuel, CHP, refrigeration electricity, and the animal slaughtering and processing figures; shares calculated from the table.
  2. Discovery Energy, protein processing case study, the Missouri result.

Find out what your bills should have cost.

Send one recent bill per site, or a list of accounts. We tell you where we expect findings before you sign anything. No upfront audit fee.