Request a bill review
Utility bill pay ยท Cost allocation

Utility cost allocation and GL coding for multi-site companies

Every utility bill has to land on the right site, cost center and general ledger account. When the coding is wrong or late, plant managers see costs that are not theirs, budgets miss and billing errors hide in the averages. Discovery codes every bill before it is paid.

Utility cost allocation is the assignment of each utility bill, or part of a bill, to the site, cost center, GL account and legal entity that used the service. At Discovery Energy it is a step inside utility bill pay: each bill is checked, coded against an account map built from the client's own chart of accounts, and only then paid.

01 / 07

Part of utility bill pay

Cost allocation is one step in Discovery's utility bill pay service, not a separate project. Each bill is received, checked against the account's history and tariff, coded to its site, cost center and GL account, and only then paid. Because coding happens before payment, finance gets bills that are already allocated, and a bill that does not fit its account map is stopped and checked instead of being paid and fixed later.

The same account inventory that drives bill pay drives allocation, so new and acquired sites are coded correctly from their first bill, and the data in TaraBase reporting matches what accounts payable recorded.

Why allocation matters more for utilities than for most costs

Utility bills are recurring, variable and tied to physical places. A coding mistake repeats every month, and it moves cost between sites whose managers are judged on it. Three features make utilities harder to allocate than other overhead:

  • Billing periods do not match accounting months. The US Energy Information Administration notes that electricity bills cover periods of 28 to 35 days that vary by customer class, so a single bill often straddles two months.
  • Few sites are submetered. In the EIA's 2022 Manufacturing Energy Consumption Survey, only 8% of manufacturing establishments had any submetering capability. Where one utility meter serves several lines, tenants or buildings, the split has to come from a rule, not a meter.
  • Accounts change with the business. Acquisitions, closures and new buildings add and remove accounts. The account map has to change with them, or costs fall into catch-all lines.

02 / 07

Where allocation goes wrong

Bills on the wrong site

An account number changes or a bill arrives at the wrong office, and the cost lands on a site that did not use it.

Shared meters split by habit

One meter serves several tenants, lines or buildings, and the split has not been checked since it was set.

New sites in a catch-all account

Acquired and new sites get coded to a general account until someone sets them up, which can take months.

Late bills distort the month

A bill paid late, or for two periods at once, makes one month look expensive and the next look cheap.

Closed sites still costing money

A meter at a closed site keeps billing customer charges and minimums to a cost center that no longer exists. Clients on bill pay have each bill matched to a site before it is paid, so a meter on a closed site is flagged the first month it bills. See closed-site accounts.

Supply and delivery counted twice, or once

In deregulated markets a site can receive a utility delivery bill and a separate supplier invoice for the same usage. If only one is mapped, the site looks cheap; if both carry the usage, it looks twice as large.

03 / 07

How it works

  1. Build the account map

    Every utility account is tied to a site, cost center, GL account and legal entity, using your existing chart of accounts.

  2. Review before payment

    Each bill is checked for errors and matched to its site before it is paid. Bills that do not match, or that change sharply, are flagged.

  3. Pay on time, coded

    Bills are paid on time and coded to your cost centers and GL accounts, ready for your accounting team.

  4. Report by site

    TaraBase dashboards show cost, usage, contracts and Scope 1 and 2 data by site, region and business unit.

What helps us build the account map

  • A list of utility accounts with service addresses, or one recent bill per site
  • Your cost center structure and the GL accounts you use for each utility type
  • Which legal entity holds each site, especially after acquisitions
  • Any meters shared between cost centers, tenants or buildings, and how they are split today
  • Sites opening, closing or changing hands in the next 12 months

You do not need to change your chart of accounts. Most portfolios move their bills over in 30 to 45 days.

04 / 07

Splitting shared meters

When one meter serves more than one cost center, the split needs a rule: sub-meter readings where sub-meters are installed, floor area, production volume or operating hours, or fixed percentages agreed with each cost center. Whatever the rule, it should be written down, applied the same way every month and reviewed when a site changes.

Split ruleBest whenWatch for
Sub-meter readingsSub-meters are installed on each line, tenant or buildingSub-meters that are not read, have failed, or do not add up to the utility meter
Floor areaSpace is used in similar ways, such as offices or warehouse baysA small area with heavy equipment, such as a freezer or compressor room, carrying too little cost
Production volumeEnergy use rises and falls with output on each lineFixed loads such as lighting and HVAC that run whatever the output
Operating hoursCost centers run different shifts on similar equipmentDemand charges, which follow the peak, not the hours
Fixed percentagesUse is stable and the parties have agreed a sharePercentages left unchanged after a line, tenant or shift is added or removed

Illustrative example, not a client result

A plant's single electric meter serves two production lines and an office. The split was set at 45%, 45% and 10% by floor area. Line B later added a second shift and a large compressor, and now drives most of the monthly peak. Under the old split, Line A carries about half of a demand charge it barely affects, and its cost per unit looks worse every month. Moving to a rule based on operating hours or sub-meter readings, agreed in writing, puts the cost where it is caused. The total bill does not change; the decisions made from it do.

Bills that span two months

For month-end reporting, usage on a bill that crosses a month boundary is usually split in proportion to the days in each month. A bill for November 18 to December 17 covering 30,000 kWh puts 13,000 kWh in November and 17,000 kWh in December. Applied the same way to every account, this gives a complete year without gaps or overlaps. Our Scope 2 data guide explains the method.

05 / 07

What you get each cycle

DeliverableWhat it covers
Coded bill detailSite, cost center, GL account, period, usage and charges for every bill
On-time paymentNo late fees from bills sent to the wrong place
ExceptionsBills that do not match a site, or that changed sharply, flagged before payment
DashboardsSavings, usage, contracts, bills and Scope 1 and 2 data in TaraBase

How allocation fits with the rest of the work

Allocation tells you where cost belongs; it does not tell you whether the cost was right. A utility bill audit tests each electricity and gas account against its tariff and goes back 36 to 48 months to recover past overcharges, usually for a contingency fee of 15% to 50% of refunds and verified savings. Clean, site-level allocation also makes the audit's findings easier to credit back to the site that paid them, and gives multi-site energy management and benchmarking a reliable base.

How it is priced

Cost allocation is part of bill pay, which is priced per engagement by number of bills, utility types and complexity. TaraBase reporting is included with bill pay. See pricing.

After an acquisition103 facilities

moved onto one account inventory after more than half of them were paying late fees every month. Read the case study.

06 / 07

Allocation at scale

A global chemical distributor growing by acquisition had more than 215 facilities, more than 1,000 utility accounts and 87 providers, with each acquired site bringing its own utilities into a fragmented process. Newly acquired facilities' accounts are now identified, verified and brought into the same centralized process, and the company's finance and accounting teams, including AP, controlling and regional accounting roles, use TaraBase across 13 regions. Read the 215-facility case.

07 / 07

Frequently asked questions

Which utilities can Discovery code and pay?

Electricity, natural gas, water, sewer and any other utility type. Audits cover electricity and natural gas only.

How long does it take to move our bills over?

Most portfolios transition in 30 to 45 days.

Do we have to change our chart of accounts?

No. Bills are coded to the cost centers and GL accounts you already use.

Can bills be coded to a legal entity as well as a cost center?

Yes. The account map ties every utility account to a site, cost center, GL account and legal entity, which matters when acquired sites sit in different entities.

Does bill pay replace an audit?

No. Reviewing each bill before payment catches new problems month by month. An audit goes back 36 to 48 months and tests every account against its tariff to recover past overcharges.

How does this help with Scope 2 reporting?

The same coded bills give usage by site and period, traceable back to each bill, which is the starting point for location-based Scope 2.

Sources

  1. US EIA, Electric Power Monthly, Table 5.3, note that electricity sales accumulate from bills covering periods of 28 to 35 days that vary by customer class.
  2. US EIA, 2022 Manufacturing Energy Consumption Survey results, 8% of manufacturing establishments had submetering capability in 2022.

See how your bills would be coded.

Send a list of accounts and your cost center structure. We show how each account would map before you move anything.